How To Fix ‘Apple Mobile Device USB Driver’ Missing

The issue with the name “Apple Mobile Device USB Driver Missing” arises when the drivers required in the iPhone for always attaching the device to the respective Windows are missing.

These drivers are known to act as the main mediator for both the hardware and the software part. Thus, results in the smooth functioning of the system.

In case if it is not present in the system, the operating system lacks behind in the interaction phase which is carried out with the device itself. Every device that exists must have personalized drivers.

Only after installing the drivers, you are supposed to continue with the data. For resolving this issue, first, go for installing the Apple device drivers. This should be done in manual mode. Verify if this particular step helps you or not.

Understanding the “Apple Mobile Device USB Driver Missing” Error

Before we delve into the details, let’s break down the error message itself:

  • “Apple Mobile Device USB Driver” is a crucial driver software required for Windows to recognize and communicate with your Apple devices, such as iPhones and iPads.
  • “Missing” indicates that the necessary driver is not installed or is not functioning correctly on your Windows computer, preventing proper communication between your Apple device and your PC.

In simple terms, the “Apple Mobile Device USB Driver Missing” error occurs when Windows cannot find or access the required driver software to establish a connection with your Apple device, resulting in connectivity issues and potential syncing problems.

Read Also:

  1. 502 Bad Gateway
  2. Steam Content File Locked
  3. Windows 10 Start Menu Not Working

Common Symptoms of the Error

When you encounter the “Apple Mobile Device USB Driver Missing” error on your Windows computer, you may experience the following symptoms:

  1. Error Message: The primary symptom is the appearance of an error message stating that the “Apple Mobile Device USB Driver” is missing or not recognized.
  2. Inoperable Apple Device: Your Apple device, such as an iPhone or iPad, may not be detected when connected to your Windows computer, rendering it unusable for tasks like data transfer or backup.
  3. Inability to Sync: You may be unable to sync your Apple device with iTunes or other software due to the driver’s absence.

Now that we understand the symptoms, let’s explore the potential causes of the “Apple Mobile Device USB Driver Missing” error on Windows.

Causes of Apple Mobile Device USB Driver Missing

Apple mobile device USB driver is not visible to us: The issue of this invisibility arises only at the time when your system is not very capable to show up the drivers which all are associated with Apple and also attached to the computer.

Apple mobile device USB driver lacks in device manager: The error comes as a signal to make users know about the Apple device which is not detectable at the device manager while they were trying to establish a connection with the computer. Generally, it signals about the bad connection establishment between your computer and the Apple device.

Apple Mobile Device Service is missing: All the application and software associated with Apple has its self inbuilt service provider for Windows. These are utilized to control the software. If it shows any kind of malfunction in the USB driver, the features have a problem to even give a start.

How to Fix Apple Mobile Device USB Driver Missing Error

Solution 1: Checking Connection of Apple Device

As we begin to operate on the device manager and manually install the driver, find whether the Apple device and your system is connected or not. If the driver or the device is not showing up then it means that the attachment has not been set up.

Check the data cables for whether they are transmitting the data properly or whether it is working properly or not. In a few of the reports, it has been observed that the cables take up the charging process so smoothly but are unable to transmit the data in the same smooth way.

Thus, end up by not providing you the backing- up feature for your iPhone. You need to modify the port when the cable is doing its job. It should be done where your respective is attached to your system.

You can also go for an option of un- attaching the cable and then reattaching it with the system. Look for whether the device is visible or not.

Solution 2: Reinstalling Apple Mobile Device USB Driver

The reinstallation process always works in the case where the system is already attached but the Apple device is still not recognized by the system. Here, we have mentioned the solutions to two procedures.

Yes, the download through Apple for the iTunes as well as the download through Microsoft Store. It totally depends on your choice. Go according to the guidelines provided.

In case you decided to carry on the download process for the iTunes through Microsoft Store, follow these guidelines as mentioned here:

Step 1: Remove each and every connection of the Apple device away from the system. You can do this by detaching the cable.

Step 2: You need to open the lock of your Apple device. There the home screen opens- up. Try to establish a connection of your Apple device once again along with your device screen wide open. In case you find the iTunes to pop- up, we advise you to close it at once. Always ensure that the device you are using is in an open state as it needs to be, for the entire process.

Step 3: To launch the Run dialogue box, just hit the Windows + R. Then type “devmgmt.msc” in the text field. Now hit Enter.

Step 4: The Device manager opens up in front of you. So, provide expansion to the Portables devices. Then you have to right-click at the Apple device option that you are using. Now, hit the Update driver.

Step 5: You have the topmost option as “Search automatically for updated driver software”. Choose it as your choice.

Step 6: Now, that you have installed the upgraded version of the driver, follow this sequence as your next move: Settings à Update and security à Windows Update. Always keep your Windows as the updated one. At- least try to meet this particular criterion.

Step 7: Start the iTunes that you installed. Look for whether the issue still persists or not.

In case you are proceeding with the downloading through Apple, please move on with these steps as mentioned:

Step 1: Detach all the connections of the Apple device you are using from the system. You can unplug those cables.

Step 2: Open the Apple device. On your home page screen, establish the connection between your system and the Apple device. In case you find the iTunes to pop- up, we advise you to close it for once. Always ensure that the device you are using is in an open state as it needs to be, for the entire process.

Step 3: To launch the Run dialogue box, just hit the Windows + R. Then type “% ProgramFiles % \Common Files\ Apple \Mobile Device Support \Drivers”. Now hit Enter.

Step 4: The number of files will appear when the file explorer is visible on the screen. Just right click at inf along with usbaapl64.inf. Hit on Install.

Step 5: It is important that all your files must have “.inf” as their extension. Proceed to install the steps mentioned above.

Step 6: Remove the connection of your device after you have installed it. Then connect it again. Begin with iTunes and look for whether the issue resolved or not.

Solution 3: Restarting the Apple Mobile Device Service

Windows provides a service that executes the Apple drivers all over functioning. This service also supervises the module as well as ensures that every function is carried out in a proper manner in your Apple device by eliminating every issue.

This service supplies the interface required to your Apple mobile devices. In case the service is the reason behind this issue, then you must go with the option to restart your set- up. Look for whether the issue persists.

For this procedure, follow these steps for your guidance:

Step 1: To launch the Run dialogue box, just hit the Windows + R. Then type “services.msc” in its provided text file. Hit Enter.

Step 2: You have reached the services. Find the service named “Apple mobile device Service”. Provide a right hit on it and then choose Properties.

Step 3: First click on Stop to end the service, then hit on Start. Always set the startup type to Automatic.

Step 4: Again, try to attach the Apple device to your system. Then start iTunes. Look for whether the problem still exists or not.

Read Also:

  1. Plugged in Not Charging
  2. Vulkan Runtime Libraries
  3. Discord Overlay Not Working


All the solutions are well qualified. In case the issue still exists, just delete the iTunes software from the device as well as the device with taking the Solution 1 into consideration. Then install the both again.

Set up the attachment for one more time. The step just taken by you makes the by-default drivers get installed which are related to the device.

Again, if the process fails to remove the error, then give an attempt to attach the Apple device to some other system. You can also opt for an option to modify the port for your system.